Drywall shapes order form

Whoops! Something went wrong.

L inside shape
L inside shape
L outside shape
L outside shape
U inside shape
U inside shape
U outside shape
U outside shape
omega inside shape
Omega inside shape
omega outside shape
Omega outside shape
Z inside shape
Z inside shape
Z outside shape
Z outside shape
step inside shape
Step inside shape
step outside shape
Step outside shape
drape pocket
Drape pocket
light cove
Light cove
window return
Window return
castle cut
Castle cut
column wrap
Column wrap
ceiling tiles
Ceiling tiles
custom
Custom
L inside shape
  • All dimensions must be listed in inches
  • The total of A + B must = 48” or less
  • A 54” board can be used if A + B = more than 48” and less than 54”
  • Standard profile lengths are 96” (8’), 120” (10’), and 144” (12’)
  • Custom profile lengths will incur additional cut charges
  • Unless noted, all shapes will have 1 factory edge minimum
  • If using pan head framing screws, add 1/16” to measurements
1.
Dimension A
Dimension B
Length
Board type
Thickness
Edge A
Edge B
Edge Top
Edge Bottom
Quantity
Comment
Add row
L outside shape
  • All dimensions must be listed in inches
  • The total of A + B must = 46.75” or less
  • A 54” board can be used if A + B = more than 46.75” and less than 52.75”
  • Standard profile lengths are 96” (8’), 120” (10’), and 144” (12’)
  • Custom profile lengths will incur additional cut charges
  • Unless noted, all shapes will have 1 factory edge minimum
  • If using pan head framing screws, add 1/16” to measurements
1.
Dimension A
Dimension B
Length
Board type
Thickness
Edge A
Edge B
Edge Top
Edge Bottom
Quantity
Comment
Add row
U inside shape
  • All dimensions must be listed in inches
  • The total of A + B + C must = 48” or less
  • A 54” board can be used if A + B = more than 48” and less than 54”
  • Standard profile lengths are 96” (8’), 120” (10’), and 144” (12’)
  • Custom profile lengths will incur additional cut charges
  • Unless noted, all shapes will have 1 factory edge minimum
  • If using pan head framing screws, add 1/16” to measurements
1.
Dimension A
Dimension B
Dimension C
Length
Board type
Thickness
Edge A
Edge B
Edge Top
Edge Bottom
Quantity
Comment
Add row
U outside shape
1.
Dimension A
Dimension B
Dimension C
Length
Board type
Thickness
Edge A
Edge B
Edge Top
Edge Bottom
Quantity
Comment
Add row
Omega inside shape
  • All dimensions must be listed in inches
  • The total of A + B + C + D + E must = 45.5” or less
  • A 54” board can be used if A + B + C + D + E = more than 45.5” and less than 51.5”
  • Standard profile lengths are 96” (8’), 120” (10’), and 144” (12’)
  • Custom profile lengths will incur additional cut charges
  • Unless noted, all shapes will have 1 factory edge minimum
  • If using pan head framing screws, add 1/16” to measurements
1.
Dimension A
Dimension B
Dimension C
Dimension D
Dimension E
Length
Board type
Thickness
Edge A
Edge B
Edge Top
Edge Bottom
Quantity
Comment
Add row
Omega outside shape
  • All dimensions must be listed in inches
  • The total of A + B + C + D + E must = 45.5” or less
  • A 54” board can be used if A + B + C + D + E = more than 45.5” and less than 51.5”
  • Standard profile lengths are 96” (8’), 120” (10’), and 144” (12’)
  • Custom profile lengths will incur additional cut charges
  • Unless noted, all shapes will have 1 factory edge minimum
  • If using pan head framing screws, add 1/16” to measurements
1.
Dimension A
Dimension B
Dimension C
Dimension D
Dimension E
Length
Board type
Thickness
Edge A
Edge B
Edge Top
Edge Bottom
Quantity
Comment
Add row
Z inside shape
  • All dimensions must be listed in inches
  • The total of A + B must = 46.75” or less
  • A 54” board can be used if A + B = more than 46.75” and less than 52.75”
  • Standard profile lengths are 96” (8’), 120” (10’), and 144” (12’)
  • Custom profile lengths will incur additional cut charges
  • Unless noted, all shapes will have 1 factory edge minimum
  • If using pan head framing screws, add 1/16” to measurements
1.
Dimension A
Dimension B
Dimension C
Length
Board type
Thickness
Edge A
Edge B
Edge Top
Edge Bottom
Quantity
Comment
Add row
Z outside shape
  • All dimensions must be listed in inches
  • The total of A + B must = 46.75” or less
  • A 54” board can be used if A + B = more than 46.75” and less than 52.75”
  • Standard profile lengths are 96” (8’), 120” (10’), and 144” (12’)
  • Custom profile lengths will incur additional cut charges
  • Unless noted, all shapes will have 1 factory edge minimum
  • If using pan head framing screws, add 1/16” to measurements
1.
Dimension A
Dimension B
Dimension C
Length
Board type
Thickness
Edge A
Edge B
Edge Top
Edge Bottom
Quantity
Comment
Add row
Step inside shape
  • All dimensions must be listed in inches
  • The total of A + B must = 46.75” or less
  • A 54” board can be used if A + B = more than 46.75” and less than 52.75”
  • Standard profile lengths are 96” (8’), 120” (10’), and 144” (12’)
  • Custom profile lengths will incur additional cut charges
  • Unless noted, all shapes will have 1 factory edge minimum
  • If using pan head framing screws, add 1/16” to measurements
1.
Dimension A
Dimension B
Dimension C
Dimension D
Length
Board type
Thickness
Edge A
Edge B
Edge Top
Edge Bottom
Quantity
Comment
Add row
Step outside shape
  • All dimensions must be listed in inches
  • The total of A + B must = 45.5” or less
  • A 54” board can be used if A + B = more than 45.5” and less than 51.5”
  • Standard profile lengths are 96” (8’), 120” (10’), and 144” (12’)
  • Custom profile lengths will incur additional cut charges
  • Unless noted, all shapes will have 1 factory edge minimum
  • If using pan head framing screws, add 1/16” to measurements
1.
Dimension A
Dimension B
Dimension C
Dimension D
Length
Board type
Thickness
Edge A
Edge B
Edge Top
Edge Bottom
Quantity
Comment
Add row
Drape pocket
  • All dimensions must be listed in inches
  • The total of A + B must = 45.5” or less
  • A 54” board can be used if A + B = more than 45.5” and less than 51.5”
  • Standard profile lengths are 96” (8’), 120” (10’), and 144” (12’)
  • Custom profile lengths will incur additional cut charges
  • Unless noted, all shapes will have 1 factory edge minimum
  • If using pan head framing screws, add 1/16” to measurements
1.
Dimension A
Dimension B
Dimension C
Dimension D
Length
Board type
Thickness
Edge A
Edge B
Edge Top
Edge Bottom
Quantity
Comment
Add row
Light cove
  • All dimensions must be listed in inches
  • The total of A + B must = 42.75 or less
  • A 54” board can be used if A + B = more than 42.75” and less than 48.75”
  • Standard profile lengths are 96” (8’), 120” (10’), and 144” (12’)
  • Custom profile lengths will incur additional cut charges
  • Unless noted, all shapes will have 1 factory edge minimum
  • If using pan head framing screws, add 1/16” to measurements
1.
Dimension A
Dimension B
Dimension C
Dimension D
Dimension E
Dimension F
Dimension G
Length
Board type
Thickness
Edge A
Edge B
Edge Top
Edge Bottom
Quantity
Comment
Add row
Window return
  • All dimensions must be listed in inches
  • The total of A + B must = 47.325” or less
  • A 54” board can be used if A + B = more than 47.325” and less than 53.325”
  • Standard profile lengths are 96” (8’), 120” (10’), and 144” (12’)
  • Custom profile lengths will incur additional cut charges
  • Unless noted, all shapes will have 1 factory edge minimum
  • If using pan head framing screws, add 1/16” to measurements
1.
Dimension A
Length
Board type
Thickness
Edge A
Edge Top
Edge Bottom
Quantity
Comment
Add row
Castle cut
  • All dimensions must be listed in inches
  • Standard profile lengths are 96” (8’), 120” (10’), and 144” (12’)
  • Custom profile lengths will incur additional cut charges
  • Unless noted, all shapes will have 1 factory edge minimum
1.
Dimension A
Dimension B
Dimension C
Dimension D
Dimension E
Dimension F
Length
Board type
Thickness
Quantity
Comment
Add row
Column wrap
  • All dimensions must be listed in inches
  • The total of A + B must = 48” or less
  • A 54” board can be used if A + B = more than 48” and less than 54”
  • Standard profile lengths are 96” (8’), 120” (10’), and 144” (12’)
  • Custom profile lengths will incur additional cut charges
  • Unless noted, all shapes will have 1 factory edge minimum
  • If using pan head framing screws, add 1/16” to measurements
1.
Dimension A
Dimension B
Dimension C
Dimension D
Dimension E
Length
Board type
Thickness
Edge A
Edge B
Edge Top
Edge Bottom
Quantity
Comment
Add row
Ceiling tiles
1.
Tile dimensions
Dimension A
Dimension B
Board type
Board Direction
Edge Profile
Grid Size
Style
Quantity
Comment
Add row
Custom
1.
Drawing
Length
Board type
Thickness
Quantity
Comment
Add row